產品用途
沖擊電壓發生器主要用來檢驗和試驗各種高壓電氣設備在雷電和操作過電壓下絕緣性能試驗，是供配電系統、電力設備制造廠、科研部門和高等院校等部門必備試驗設備。它主要用于電力設備等試品進行雷電沖擊電壓全波、雷電沖擊截波、陡波和操作沖擊電壓波等沖擊電壓試驗和研究。適用用于絕緣子、避雷器、高壓開關、斷路器、變壓器、電力電纜等的沖擊耐壓試驗。
產品技術參數
標稱電壓 | ±200~±4800kV |
級電壓 | ±100~±200kV |
級電容量 | 0.5~2uF |
級數 | 2~24節 |
沖擊容量 | 0.5~0.01uF |
沖擊能量 | 11.25~400kJ |
以上參數僅供參考，詳細方案歡迎垂詢 | |
產品特點
成套裝置配套完整，電壓等級齊全。
通常采用G型、E型、H型三種系列的主回路設計。
采用低速齒輪齒條傳動機構調整各級球隙，不僅噪聲、磨損小，而且定位快速、準確。
采用彈簧壓接、方便撥插的調波電阻固定機構，使調波方便，操作簡單。
采用自動觸發裝置，使球隙具有20%以上的觸發范圍，保證同步性能好，動作可靠。
采用恒流充電方式，充電電壓穩定，不穩定度不大于±1%。
電阻采用無感繞制方式，保證整體回路電感小。
采取帶阻濾波措施時，在大容量負載下仍然產生標準沖擊波,負載能力大。
電壓利用系數高，雷電波不低于85%，操作波不低于70%。
采用自動鋼帶裝置將主電容器短路接地。
采用計算機控制系統技術，自動化程度高，抗干擾能力強。
Product Usage
The impulse voltage generator is mainly used to inspect and test the insulation performance of various high-voltage electrical equipment under lightning and switching overvoltage, and is provided for distribution
Necessary testing equipment for electrical systems, power equipment manufacturers, scientific research departments, and higher education institutions. It is mainly used for testing products such as power equipment
Conduct lightning impulse voltage tests and research on full wave, chopped wave, steep wave, and switching impulse voltage waves. Suitable for insulation
Impulse withstand voltage tests for transformers, lightning arresters, high-voltage switches, circuit breakers, power cables, etc.
Product technical parameters
Nominal voltage | ± 200~± 4800kV |
Level voltage | ± 100~± 200kV |
Level electrical capacity | 0.5~2uF |
series | 2-24 sections |
Impact capacity | 0.5~0.01uF |
Impact energy | 11.25-400kJ |
The above parameters are for reference only. Please feel free to inquire about detailed solutions | |
Product Features
The complete set of equipment is complete and the voltage level is complete.
Usually, three series of main circuit designs are used: G-type, E-type, and H-type.
Adopting a low-speed gear rack transmission mechanism to adjust the ball clearance at all levels not only reduces noise and wear, but also enables fast and accurate positioning.
The fixed mechanism of the adjustable resistor with spring compression and convenient insertion makes the adjustment convenient and easy to operate.
Adopting an automatic triggering device, the ball gap has a triggering range of over 20%, ensuring good synchronization performance and reliable action.
Adopting constant current charging method, the charging voltage is stable and the instability is not greater than ± 1%.
The resistor adopts a non-inductive winding method to ensure that the overall circuit inductance is small.
When adopting bandstop filtering measures, standard shock waves are still generated under high capacity loads, resulting in high load capacity.
The voltage utilization coefficient is high, with lightning waves not less than 85% and operating waves not less than 70%.
Use an automatic steel strip device to short-circuit and ground the main capacitor.
Adopting computer control system technology, it has a high degree of automation and strong anti-interference ability.
The use of a digital measurement and analysis system for shock waveforms and a computer online processing system for shock test data has high measurement accuracy.
This set of products can generate the following standard waveforms: standard lightning impulse voltage full wave 1.2 ± 30% us/50 ± 20% us; Standard operating shock Voltage wave 250 ± 20% us/2500 ± 60% us; Lightning cutoff time 2-6us; Standard steep wave steepness above 1000kV/us.
Main components of the product
Impulse voltage generator body
Charging device
Weakly damped capacitive voltage divider
control system
measurement system
Product optional components
Steeping device (insulator test)
Chopping device (transformer type product test)
Special impulse waveform matching resistor
Modulation capacitor and inductance
Diverter
Mobile gas chassis
Other required components本套產品可產生以下幾種標準波形：標準雷電沖擊電壓全波 1.2±30%us /50±20%us；標準操作沖擊
電壓波 250±20%us /2500±60%us；雷電截波截?cái)鄷r(shí)間2-6us；標準陡波陡度1000kV/us以上。
產品主要部件
沖擊電壓發生器本體
充電裝置
弱阻尼電容分壓器
控制系統
測量系統
產品可選部件
陡化裝置（絕緣子試驗）
截波裝置（變壓器類產品試驗）
特殊沖擊波形匹配電阻
調波電容、電感
分流器
移動氣體底盤
其他需要的部件
