品牌：RETZ瑞茨/我們一直致力于流體控制和測控領域的持續創新，始于2005……
進口電動法蘭三通球閥能實現對管道中介質流向的切換，也能使相互垂直的兩個通道連通或關閉。四閥座密封三通球閥不僅可實現介質流向的切換，也可使三個通道相互連通，現時也可關閉任一通道，使另外兩個通道連通，靈活控制管路中介質的合流或分流
retz The imported electric flange three-way ball valve can switch the flow direction of the medium in the pipeline, and can also connect or close two perpendicular channels. The four seat sealed three-way ball valve not only switches the flow direction of the medium, but also enables the three channels to be interconnected. Currently, any channel can also be closed to connect the other two channels, flexibly controlling the convergence or diversion of the medium in the pipeline
功能介紹 Function introduction
進口電動法蘭三通球閥用于換向分流或匯合流通，是具有二面或四面閥座的多通口球閥，任一通口可用作入口而無泄漏。三通既可制成L型通口也可制成T型通口 RETZ Three-way ball valve is used for reversing and diverting or converging flow. It is a multi-port ball valve with two or four seats. Any port can be used as an inlet without leakage. Tees can be made into L-shaped ports or T-shaped ports
L型流道的三通4面閥座球閥，采用2面閥座，受力平衡，保證閉止通道的可靠密封。主要用于流路的換向 Three-way four-side valve seat ball valve with L-shaped flow passage adopts two-side valve seat, with balanced stress, to ensure reliable sealing of the closing channel. Mainly used for commutation of flow path
T型流道的三通4面閥座，由于采用4面閥座，亞力平衡，保證閉止通道的可靠密封。主要用于分流、混流、換向以及三通道的完全開放 The three-way four-face valve seat of the T-shaped flow passage is balanced by Yali due to the four-face valve seat, which ensures the reliable sealing of the closing channel. It is mainly used for shunt, mixed flow, commutation and full opening of three channels
設計特色 Design features
防火、防靜電設計 Fireproof and anti-static design
閥桿防爆出裝置 Explosion-proof valve rod outlet device
閥球上設計有壓力平衡孔 The valve ball is designed with a pressure balance hole
雙層閥桿填料與對壓碟型彈片裝置 Double-layer valve stem packing and counter-pressure disc spring device
進口電動法蘭三通球閥主要零件材料 Material of main parts
零件名稱 材料名稱
閥體 WCB 304(CF8) 316(CF8M) 316L(CF3M)
球體 2Cr13+氮化處理 304 316 316L
閥桿 2Cr13 304 316 316L
密封圈 聚四氟乙烯(PTFE)、增強聚四氟乙烯(PPL)、對位聚苯、柔性石墨
適用介質 水、氣體、蒸汽、油品等 硝酸等腐蝕性介質 醋酸等腐蝕介質 尿素等腐蝕性介質
主要技術參數及性能 Main technical parameters and performance
公稱通徑 DN(mm) 15 20 25 32 40 50 65 80 100 125 150 200
允許壓差(MPa) ≤公稱壓力
動作范圍 0～90°
閥體形式 二段分體式鑄造閥體
閥蓋形式 整體式
壓蓋型式 螺栓壓緊式
密封填料 V型聚四氟乙烯填料、含浸聚四氟乙烯石棉填料、石棉紡織填料、石墨填料
連接方式 法蘭式、螺紋式(適用于1/2"～2")
閥芯形式 三通球型閥芯
流量特性 近似快開特性
泄露量Q 軟密封：零泄露；金屬密封：按GB/T4213-92，小于額定KV0.01%
基本誤差 ±1%
回差 ±1%
死區 ≤1%
控制方式 開關到位燈(開關兩位控制)、無源觸點信號、1/5K電位計、智能調節(4～20mA模擬量信號控制)
執行器技術參數 Technical parameters of actuator
電源電壓 AC220/380V，50/60Hz
輸出力矩 50N•M～2000N•M
動作范圍 0～90° 0～360°
動作時間 15秒/30秒/60秒
保護裝置 過熱保護
環境溫度 -30°～60°
手動操作 同附帶手柄操作
限位 電氣、機械二重限位
防護等級 相當于IP-65
防爆等級 ExdII BT4；特殊要求可定制ExdII BT6
位置測量 可選裝開關或電位計
驅動電機 8W/E
進線接口 PE1/2〞進線線鎖
