型號：	KBQ-2TC
技術指標：	KBQ-2TC手提式電熔捆包機/電熔打包機/電熔捆扎機/手提式打包機/手工熱熔打包機/手動熱合打包機是以聚乙烯塑料帶為捆扎材料、主要用于商業、郵政、鐵路、銀行、食品、醫藥、書刊、發行等行業的紙箱、木箱、紙包件、布包件的包裝捆扎。在插入包裝帶后，機器收帶、熱合、切斷都需人工完成。用于一些體積大的箱子進行打包。 電源:220V 50Hz 150W 捆緊力: 60KG 最小包裝尺寸: 50x80mm 打包速度: ≤120次/時 外形尺寸:300x200x200mm PP帶寬度:12-15mm 重量: 3kg Electrical source: 220V 50Hz 150W max contraction power: 60KG minimum packaging size: 50x80mm packaging rate: ≤120 times/hour outline size: 300x200x200mm the width of PP strap: 12-15mm weight: 3kg this machine takes advantage of the polythene plastic strap as the enlacing material,mainly applied in the packagingenlacing of cartons, wooden box, paper wrappage, fabric wrappage in industries such as business, post, railway, bank, food, medicine, booksperiodicals, publish,so on. After inserting the packaging strap, machine getting back the strap, thermal-bondcutting needs manual operation. Is suitable to package some case with large volume.
產品說明：	如果量大或是要效率高就選擇凱比奇KBQ自動打包機/捆扎機/捆包機。 “凱比奇KBQ”牌自動打包機/捆扎機： 1、接頭短,不用鐵扣,符合國際環保要求(出口要求)又節約成本； 2、打包速度快,效率高,每打一道PP帶僅需1.5秒； 3、速熱系統,1V低電壓,安全性好,瞬間加熱,開機5秒鐘后進入打包狀態； 4、自動停機裝置,省電實用.超過60秒不再操作時,馬達會自動停機,進入待機狀態； 5、電磁離合,快速平穩,連軸式傳動,速度快、噪聲小、磨損少、故障率低； 6、新型電路設計，采用插入式集成電路板控制整個打包動作和燙頭溫度，把電路部份分開，電路板維修檢查方便； 7、新型電熱鋼片設計，壽命長、退熱快，免除普通燙頭之易變型和短路的缺點； 8、可使用6-15mm寬度之打包帶，保證粘合效果完整一致； 9、設有快速調節旋鈕，捆緊力大小可任意調節相當方便。 If the requirement is large quantityhigh efficiency, please choose the automatic packer/enlacing machine/bundling package machine. automatic packer/enlacing machine with ELIDA brand: 1、short interface, no metal button, meet the requirement of international environment protection； 2、fast packaging rate, high efficiency, 1.5 second per lane； 3、quick heat system, just need l V voltage, safety, heating instantly, getting into best packaging status after started； 4、automatic stop setting, save electricity practically. The motor will stop automatically if no operation after 60 seconds, the gets into ready status. 5、electromagnetism coupling , faststable, axis transmitting, high rate, less noiseabrasion, low failure rate; 6、new type circuit design, using inserting style integrated circuit board to control the whole packing operationiron head temperature, separating the circuit part,the maintenance of circuit board is conveniently； 7、new type electric-heat steel slice design, long life, fast heat fading, avoid the fault of shapelessshort circuit which general iron head usually caused； 8、may use the packing strap with 6-15mm width, ensure the adhesive efficiency consistently； 9、setting swift adjusting knob, can freely adjust the bundling power conveniently.